Knee Mills MX-6HG
Manufar
Na'urar niƙa mai nau'in gwiwa ta MX-6HG tana sanye da injin mai nauyi mai nauyin 5HP. Kayan aikin X na iya motsawa zuwa 1000mm. Hanyar jagorar gado tana ɗaukar ƙaƙƙarfan ɗan gajeren tsari mai gefe biyu, wanda ya dace da ƙaƙƙarfan buƙatun sarrafawa. Na'urar lubrication tana amfani da famfon mai ta atomatik na atomatik don sarrafa daidai yadda ake fitar da mai. Ana amfani da injunan niƙa irin nau'in gwiwa da hannu wajen sarrafa sarƙaƙƙiya da sassan sassa.
Tsarin Masana'antu
Ana kera injunan niƙa TAJANE bisa ga ainihin zanen Taiwan. Simintin gyare-gyaren yana ɗaukar tsarin simintin MiHanNa da kayan TH250, kuma an ƙera shi ta hanyar tsufa na halitta, maganin zafi mai zafi da daidaitaccen sarrafa sanyi.
Tsarin simintin gyare-gyare na Meehanite
Kawar da damuwa na ciki
Tempering zafi magani
Machining daidai
Ayyukan tebur na ɗagawa
sarrafa lathe
Cantilever machining
Matsakaicin mita
Kyakkyawan sassaƙa
Abubuwan da ake buƙata na Premium
Abubuwan da aka gyara na asali na Taiwan; X, Y, Z madaidaicin jagorar tambarin Taiwan; Manyan abubuwa biyar na kan niƙa ana siyan su daga asali na asali na Taiwan.
Tsaron Wutar Lantarki
Akwatin sarrafa wutar lantarki yana da ƙaƙƙarfan ƙura, mai hana ruwa, da ayyukan hana yaɗuwa. Amfani da abubuwan lantarki daga samfuran kamar Siemens da Chint. Saita kariyar gudun ba da sanda ta aminci ta 24V, kariyar ƙasan injin, kariyar buɗe wuta ta kofa, da saitunan kariyar kashe wuta da yawa.
Amfani da European Standard Cable
Babban kebul2.5MM², Cablel mai sarrafawa 1.5MM²
Abubuwan lantarki sune Siemens da CHNT
Bayyanar ganewa
Kulawa mai dacewa
Kariyar ƙasa
Kofa ta bude kuma za a yanke wuta.
Danna Tsaida gaggawa Kashe Wuta.
Kashe wuta
Fitilar Mai Nuna Wuta Mai Sauya Jagora
Kariyar ƙasa
Maɓallin dakatar da gaggawa
Marufi Mai ƙarfi
Ciki na kayan aikin injin an rufe shi don kare danshi, kuma na waje yana kunshe da itace mai ƙarfi mara fumigation da cikakken lulluɓe na ƙarfe don tabbatar da amincin sufuri. Ana ba da bayarwa kyauta a manyan tashoshin jiragen ruwa na cikin gida da tashar jiragen ruwa na kwastam, tare da jigilar lafiya zuwa duk yankuna na duniya.
Na'urorin haɗi na injin niƙa suna saduwa da buƙatun sarrafawa daban-daban
Daidaitaccen kayan aiki: Manyan kayan haɗi tara an haɗa su azaman kyauta don biyan buƙatun sarrafa abokan ciniki daban-daban.
Gabatar da sassa iri guda tara don magance damuwar ku
Abubuwan da ake amfani da su: Manyan abubuwan amfani guda tara sun haɗa don kwanciyar hankali. Wataƙila ba za ku taɓa buƙatar su ba, amma za su adana lokaci idan kun yi.
Kayan aikin injin ƙarin kayan aiki, dacewa da aiki daban-daban
Ƙarin kayan aiki: Kayan aikin taimako suna faɗaɗa ayyuka don aiki na musamman / rikitarwa (na zaɓi, ƙarin farashi).
| Samfura | Saukewa: MX-6LW |
|---|---|
| Ƙarfi | |
| Wutar lantarki ta hanyar sadarwa | Mataki na uku 380V (ko 220V, 415V, 440V) |
| Yawanci | 50Hz (ko 60Hz) |
| Babban ikon tuƙi | 5 hpu |
| Jimlar iko / kaya na yanzu | 9.5kw/11A |
| Machining sigogi | |
| Girman kayan aiki | 1372×330mm |
| X-axis tafiya | 1030mm |
| Y-axis tafiya | 400mm |
| Z-axis tafiya | mm 380 |
| Wurin aiki | |
| T-slot na aiki | 3×16×65mm |
| Matsakaicin ƙarfin ɗaukar nauyi na bench | 500kg |
| Nisa daga ƙarshen spindle fuska zuwa benci | mm 660 |
| Nisa daga cibiyar spindle zuwa farfajiyar jagora | 200mm |
| Milling kai sandal | |
| Nau'in madaurin sandar | NT40 |
| Spindle sleeve bugun jini | 120mm |
| Gudun ciyarwar Spindle | 0.04; 0.08; 0.15 |
| Diamita na waje na sandal | 85.725 mm |
| Milling kai gudun | |
| Matakan saurin juyi | matakai 16 |
| Wurin sauri | 70-5440 rpm |
| Adadin matakai (ƙananan zango) | 70, 110, 180, 270, 600, 975, 1540, 2310rpm |
| Adadin matakai (high range) | 140, 220, 360, 540, 1200, 1950, 3080, 5440rpm |
| Tsarin | |
| Swivel milling kai | 90° hagu da dama, ±45° gaba da baya, 360° cantilever |
| Nau'in jagora (X, Y, Z) | ▲ ■ ■ |
| Hannun tsawo na Ram | mm 520 |
| Hanyar shafawa | Lantarki ta atomatik lubrication |
| Al'amari | |
| Tsawon | 1980 mm |
| Nisa | 1750 mm |
| Tsayi | 2050 mm |
| Nauyi | 2300kg |
